Do not start by measuring the whole room. Measure the exact place the furniture will occupy, then check what happens when you open or use it, and finally check the route it must travel to reach that spot.

01 · Where it sits

Measure the exact furniture position, not the whole room

If you are buying a sideboard for one wall, the useful measurement is that wall position — not the total size of the living room.

WidthHow much wall space is really usable?

Measure between the points the furniture cannot cross, such as a doorway, built-in cabinet or wall return.

DepthHow far can it come into the room?

Measure from the wall to the point where the furniture would start interfering with another item or route through the room.

HeightIs anything above it?

Check window sills, shelves, switches, wall fittings or anything else that limits the height.

A 180 cm sideboard + a 200 cm wall does not automatically mean it fits.

If a nearby room door needs 40 cm of that wall to open properly, your usable space is already smaller than the furniture.

Also look for curtains, skirting boards and sockets. They can reduce the usable position even when the wall itself is wide enough.

02 · When it opens

Check the furniture after it opens, pulls out or reclines

A product can fit perfectly when closed and still be awkward once you actually use it.

Cabinets & sideboards

Can the doors and drawers open fully?

Check whether they hit a wall, sofa, bed or nearby furniture before you decide the position works.

Recliners & sofa beds

How much bigger do they become in use?

Compare the fully opened or reclined position with the space you have at home, not only the compact showroom size.

Furniture size is not always the same as space needed to use the furniture.

When a product has moving parts, ask to see it fully open in the showroom before you rely on the closed dimensions.

03 · How it gets in

Measure the route from your entrance to the final room

Large furniture does not teleport into place. Follow the same route the delivery team will use and look for the narrowest point or most difficult turn.

  1. Lift. Check the lift door and, for larger pieces, the usable space inside the lift.
  2. Common corridor. Look for narrow sections, pillars or objects that reduce turning space.
  3. Main door. Measure the clear opening with the door fully open.
  4. Turns. A 90° corner can be harder than a narrow doorway. Measure it and take a photo.
  5. Room door. Check the final doorway too — it may be smaller than your main entrance.
If access looks tight, ask one simple question in the showroom:

“Does this model arrive in one piece, or can parts such as legs, backs or doors be removed for delivery?”

04 · Before you buy

Bring these five things if you are not sure whether it will fit

You do not need a technical floor plan. A small set of clear measurements and photos is usually much more useful when checking a specific furniture model.

  1. Position width. The usable width where the furniture will actually sit.
  2. Usable depth. How far the furniture can project into the room.
  3. Height limit. Any window, shelf or wall fitting above the position.
  4. Narrowest entrance. The smallest doorway or access point on the route.
  5. Photos of difficult spots. Especially doorways, corners or turns. A photo with the tape measure visible is even better.
If you only remember one thing, bring the photos.

A measurement tells us the number. A photo shows what is causing the restriction.